|
Copper door is called a luxury entrance, its superb craftsmanship and practicality are very good. Tongmen copper products superb technology, mainly through the embossed patterns and auspicious patterns carved out, and long life, by the people's welcome and love.
Of course, Tongmen copper processing of the welding process is also very important, because the quality of welding will directly affect the quality of the assembly. Therefore, in the welding time, ocean will be strictly required to control the welding gap. Next, let you talk about copper door copper processing before and after welding a few points to prepare:
First, the copper products before welding the preparation of what?
1, the welding node assembly, and then by the person after the inspection, to the welder welding.
2, before welding, you must check the welding position of the scaffolding, whether safe, reliable, complete.
3, to clean the welding of the groove area, and then welding the electrode with a heating barrel into the welding site.
4, welding protective equipment remember to bring, so as not to cause harm to the human body.
Second, the copper products processing work in the welding of what matters?
1, copper processing and welding, copper doors can be used symmetrical welding. Whether it is butt welding, or vertical welding and diagonal welding, in short, is symmetrical, this welding method is to avoid welding deformation.
2, copper products processing in the welding process, as long as the weld inside the slag and splash, it is necessary to immediately remove, and found defects, be sure to use the grinding wheel.
3, this piece of welding after the end of welding, we must just clean the finished site clean up, and then transferred to the next welding point welding, so as not to affect the quality of welding.
The last is the copper products after welding inspection work, and wait until the welding of all welds after the end of the cooling, to conduct a weld inspection, and copper processing welds shall not have cracks.
|
